Table of Contents
Advertisement
Quick Links
INSTRUCTION MANUAL
WARNING
AQUB1820 GP-1 Mini.indd 1
AQUB1820 GP-1 Mini.indd 1
Never attempt to swim after a stalled R/C boat.
Never operate your R/C boat while standing in the water.
Never operate your R/C boat in the presence of swimmers.
Always use a Personal Flotation Device (PFD) when boarding and operating your
retrieval craft, i.e. Jon boat or duck boat. NOTE: Because of the sharp running
hardware included with this R/C boat, we do not recommend a rubber blow up raft.
R/C boat running hardware is very sharp. Be very careful when working on and around
the metal parts.
While the motor is running, pay close attention to the propeller. Do not come in contact
with the propeller at any time the engine is running or serious injury will result.
AquaCraft products are to be used by ages 14 and over.
aquacraftmodels.com
5/22/2013 1:22:46 PM
5/22/2013 1:22:46 PM
Advertisement
Table of Contents
Related Manuals for AquaCraft GP-1 Ulta
Summary of Contents for AquaCraft GP-1 Ulta
-
Page 1: Instruction Manual
While the motor is running, pay close attention to the propeller. Do not come in contact with the propeller at any time the engine is running or serious injury will result. AquaCraft products are to be used by ages 14 and over. AQUB1820 GP-1 Mini.indd 1 AQUB1820 GP-1 Mini.indd 1... -
Page 2: Items Included
❍ Duratrax Ultimate Hex Driver 2.0 mm (DTXR0289) ❍ Duratrax Ultimate Hex Driver 2.5 mm (DTXR0290) Thank you for purchasing the AquaCraft GP-1 Ultra Hydroplane. ❍ Duratrax Precision Nut Driver 5.5 x 75 mm (DTXR0212) We want the time you spend with your new R/C boat to be fun ❍... -
Page 3: Warranty Service
➧ Two blade 30mm FRP propeller time you enter your retrieval craft. ➧ Transom drain plug ● AquaCraft products are to be used by ages 14 and over. ● Do not touch the propeller anytime the motor is running. MOTOR KV rating: 2200 kV @ 11.1V... -
Page 4: Assembly Sequence
Understanding Your Transmitter To help you better understand your transmitter and its functions, here is a picture outlying the operation features. Install 4“AA” batteries into the transmitter in the confi guration molded into the battery fl oor and reinstall the battery door. 1 Steering Wheel 2 LED Power Indicator 3 Power ON/OFF Button... - Page 5 It’s also install on to the battery’s back. Install the battery into the boat a great system if you want to add to your AquaCraft as shown. boat collection. This system offers 40-model memory and 10-character naming –...
-
Page 6: Maintenance
Your GP-1 Ultra Mini Hydroplane is designed to turn right. It’s also important to note this boat is FAST! Having said this, it is best to be quite aggressive with the throttle to overcome any cavitation that the boat might encounter as it starts to move forward. -
Page 7: Performance Tuning
The strut can be tweaked to change the ride of the boat but AquaCraft Facebook page! only experienced modelers should attempt this. If you are going to tweak the strut remove the prop shaft and prop. Loosen the strut bolt. -
Page 8: Ordering Replacement Parts
Ordering Replacement Parts Parts List To order replacement parts for the AquaCraft GP-1 Ultra Mini AQUB6240 Cowl Hydroplane, use the order numbers in the replacement parts AQUB6268 Wire Drive with Prop Shaft list. Replacement parts can be purchased from your local...