Table of Contents
Advertisement
Quick Links
aquacraftmodels.com
INSTRUCTION MANUAL
Never attempt to swim after a stalled R/C boat.
Never operate your R/C boat while standing in the water.
Never operate your R/C boat in the presence of swimmers.
Always use a Personal Flotation Device (PFD) when boarding and operating your
retrieval craft. NOTE: Because of the sharp running hardware included with this R/C
boat, we do not recommend a rubber blow up raft.
R/C boat running hardware is very sharp. Be very careful when working on and
around the metal parts.
While the motor is running, pay close attention to the propeller. Do not come in
contact with the propeller at any time the engine is running or serious injury will
result.
AquaCraft products are to be used by ages 14 and over.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for AquaCraft GP-1 ultra
Summary of Contents for AquaCraft GP-1 ultra
- Page 1 While the motor is running, pay close attention to the propeller. Do not come in contact with the propeller at any time the engine is running or serious injury will result. AquaCraft products are to be used by ages 14 and over.
-
Page 2: Items Included
(GPMP0751) or other safe charge container when charging. DISCHARGING OR OPERATION In normal operation you will fi nd your GP-1 Ultra Hydroplane will use around 200 to 225 mAh per minute of operation. On rough water, your GP-1 Ultra Hydroplane will use around 180 to 200 mAh per minute. -
Page 3: Warranty Service
GP-1. Remember to use a PFD any time ➧ Transom drain plug you enter your retrieval craft. ● AquaCraft products are to be used by ages 14 and over. MOTOR ● Do not touch the propeller anytime the motor is running. -
Page 4: Assembly Sequence
INSTALLING THE BATTERY PACK Understanding Your Transmitter To help you better understand your transmitter and its functions, here is a picture outlying the operation features. Remove the canopy by lifting at the back and rotating up off the front pins. 1 Steering Wheel 2 LED Power Indicator 3 Power ON/OFF Switch... -
Page 5: Maintenance
Place the boat in water that is at least 12" (305 mm) deep. Make sure the water is free of weeds, sticks or other fl oating debris. Your GP-1 Ultra Hydroplane is designed to turn right. It’s also Using a 2mm hex wrench, loosen the screws holding the drive important to note this boat is FAST! Having said this, it is cable to the motor coupler. -
Page 6: Performance Tuning
Performance Tuning Keep in mind, as you tune your GP-1 Ultra Hydroplane for top speed and handling that this boat IS SMALL AND FAST! Because of its size it only needs very small adjustments to change the way it performs. -
Page 7: Ordering Replacement Parts
Ordering Replacement Parts alignment of the driveshaft to the motor coupler. If needed, you might have to re-bend this area to regain alignment. To order replacement parts for the AquaCraft GP-1 Ultra Hydroplane, use the order numbers in the replacement parts Racing list. - Page 8 © 2015 AquaCraft Models, a Hobbico ® company. AQUB1819...
Need help?
Do you have a question about the GP-1 ultra and is the answer not in the manual?
Questions and answers