Set Sleep Mode; Reset To Factory Defaults; Set Language - Pandigital PAN1200DWPTFR User Manual

Set Sleep Mode

The DPF will stay on until you power it off, however, to save power you
can set it to automatically go into a sleep mode when left idle for a
specific amount of time.
1. On the
Menu
2. Select
green dot indicates selected option).
OFF (default) = Power saver is 'disabled'; DPF will remain on until you power it off
or change the sleep mode setting
2/4/8 Hours = The DPF will automatically go into sleep mode when left idle the
specified amount of time

Reset to Factory Defaults

Use this feature to restore function settings to the factory pre-set
defaults.
Note: Wi-Fi network and photo sharing website connection settings will
not be changed.
1. On the
Menu
2. Select
3. Confirm

Set Language

Depending on model, this DPF may include multiple languages for the
user interface display. Use this feature to change the language at any
time.
1. On the
Menu
54
HOME
screen, touch or press
screen.
Set Sleep Mode
HOME
screen, touch or press
screen.
Reset to Factory Defaults
or .
Yes No
HOME
screen, touch or press
screen.
MENU
, and then select the desired setting (small
MENU
.
MENU
Setup
to display the
Setup
to display the
Setup
to display the