Disable The Schedule; Run The Schedule - Pandigital PAN1200DWPTFR User Manual

4. Use the left/right arrows to scroll through the fields, and the
up/down arrows to change the field values.
5. Touch or press
Weekends Schedule
6. Select

Disable the Schedule

To disable the schedule, turn both
Schedule

Run the Schedule

After the schedule times have been set (per instructions on page 35),
you will use the
schedule to take effect.
CAUTION: After you select the
A small timer clock will appear indicating the schedule is active, and
the DPF will go into stand-by mode according to the schedule.
36
ENTER
buttons.
to save the settings.
Done
buttons OFF, and the entry fields will display
Run Schedule
intervention will cancel the activation and the schedule
will not take effect until you select this function again to
re-activate.
At the start of a slideshow, touch
menu times out.
While a slideshow is playing, or on the
CALENDAR/CLOCK
interface and touch
At the start of a slideshow, press
button is displayed on the screen (approximately 10
SCHED
seconds).
While a slideshow is playing, or on the
screen, press
MENU
to enable the
Weekdays
Enable Weekdays/Weekends
function whenever you want the
Run Schedule
RUN SCHED
screen, activate the PanTouch
.
RUN SCHED
ENTER
, and then select
and/or
.
OFF
function, any user
before the
when the
RUN
CALENDAR/CLOCK
.
RUN SCHED