Usb Flash Drive To Dpf Connection; Bluetooth Connection; Set Sleep Mode - Pandigital PAN1201DW User Manual

12"

Table of Contents

Available languages

4. Double-click the desired drive to display the files on the card. The following example shows a card listing several JPG images.

5. To copy files from a media source, select and drag them into the DPF's internal memory drive (Pandigital).

6. Similarly, to copy files from your computer to the internal memory, first locate the files on your computer, select the files you want to copy, and then drag

and drop them into the appropriate folder in the DPF's internal memory drive.

TIP: Most cameras and graphic programs store photos in the Windows XP 'My Pictures' or Vista 'Pictures' folder. If you didn't save them to any other

location, you may find them there.

Disconnect DPF from Windows PC

It is important to always perform a safe PC 'release' before disconnecting the DPF USB cable from the PC.

WARNING: Do not unplug or switch off the DPF when files are being transferred, as that can seriously damage the memory.

Windows Vista

1. On the Windows System Tray, click the hardware removal icon.

2. Click the

Safely remove USB mass Storage device

3. When the message "This device can now be safely removed from the computer" appears, you can disconnect the USB cable from your computer.

Windows XP

1. On the Windows System Tray, click the hardware removal icon.

2. Click

Remove Hardware Safely

3. Select the storage device corresponding with the DPF, and then click

4. Click

5. When the message "It is now Safe to Disconnect Hardware" appears, you can disconnect the USB cable from your computer.

Connect DPF to Macintosh Computer

1. Use the USB cable (included) to connect the DPF to your Macintosh computer.

2. Macintosh will recognize the DPF as an external storage device.

3. Drag and drop files between the two devices as you normally move files.

Disconnect DPF from Macintosh Computer

1. To safely disconnect the DPF from your Macintosh, select DPF's icon on your desktop and press

2. When the icon is no longer on the desktop, it is safe to unplug the USB cable.

U S B F l a s h D r i v e t o D P F C o n n e c t i o n

The DPF recognizes a USB Flash Drive the same way it recognizes external memory cards. When you insert the flash drive, the DPF automatically recognizes

photo, music, and video files stored on it.

To import files from your flash drive to the DPF's internal memory, follow the file import instructions under each feature section (

12,

Video

on page 12).

B l u e t o o t h

C o n n e c t i o n

The Bluetooth feature allows you to download photos from popular Bluetooth-capable mobile phones (i.e., BlackBerry, Motorola, Nokia, SonyEricssson, and others)

directly into your DPF. A Bluetooth USB Adapter is required (not included with DPF)

Note: Phone models vary and not all phones support transmitting photos to devices like a DPF. Check to be sure your phone supports transmitting photos to

external devices like DPF.

Insert Bluetooth Dongle

1. Insert your Bluetooth dongle into the DPF's USB host port and then turn on the DPF.

2. A popup window momentarily appears with the message "

Send Photo to DPF

1. From your Bluetooth device, search for available connection devices; select the

2. Select the desired photo and then send to the DPF.

Note: The actual procedure for sending photos to the DPF varies by mobile device manufacturer/model. Refer to your mobile device User Guide for

instructions.

During the photo transmission, "Photo Transmitting" appears on the DPF screen. When completed, the photo(s) will automatically be displayed in single

photo mode.

S e t S l e e p M o d e

The DPF will stay on until you power it off, however, to save power you can set it to automatically go into a sleep mode when left idle for a specific amount of time.

HOME

1. On the

screen, press