Set Sleep Mode; Set Language; Reset To Factory Defaults - Pandigital PAN7000DW User Manual

Set Sleep Mode

The DPF will stay on until you power it off, however, to save power you
can set it to automatically go into a sleep mode when left idle for a
specific amount of time.
1. On the
2. Select
OFF (default) = Power saver is 'disabled'; DPF will remain on until you power it off
or change the sleep mode setting
2/4/8 Hours = The DPF will automatically go into sleep mode when left idle the
specified amount of time
3. Select
4. Press

Set Language

Depending on model, this DPF may include multiple languages for the
user interface display.
1. On the
2. Select

Reset to Factory Defaults

If you have changed function settings, using this feature will restore
settings to the factory pre-set defaults.
1. On the
2. Select
No
to leave current settings.
3. Press
44
HOME
screen, press
Set Sleep Mode
Done
.
EXIT
to return to the previous screen.
HOME
screen, press
Set Language
, and then select the desired language.
HOME
screen, press
Reset to Factory Defaults
EXIT
to return to the
MENU
to display the
, and then select the desired setting.
MENU
to display the
MENU
to display the
, and then select
HOME
screen.
Setup Menu
.
Setup Menu
.
Setup Menu
.
Yes
to reset, or