Set Up Wireless Network - Pandigital PAN1200DWPTFR User Manual

Set up Wireless Network

Note: You must have an active wireless network within range of the
DPF, and the Pandigital wireless Wi-Fi USB Adapter must be
connected to the DPF. (Wi-Fi adapter sold separately on our
website: http://www.pandigital.net.)
1. Insert the Pandigital wireless USB adapter into the USB Host
port on the DPF.
HOME
2. On the
3. Select
Wi-Fi Network Setup
be displayed, similar to this example:
4. Select Scan for Available Network. The wireless networks
within range will appear in the
TIP: If your wireless network is configured to be 'hidden', the scan
will not list it as an available network. In that case, instead of
performing a scan, select one of the Network SSID buttons to
manually enter the Network ID and password.
5. Select the desired Wi-Fi network to which you want to connect.
The network screen will be displayed, similar to this example:
screen, touch or press
. The
Network Setup
.
MENU
Network Setup
window.
window will
41