How To Setup - Britax Safe-n-sound Tourer Instruction Manual

HOW TO SETUP

ADJUSTING THE SLIDEGUARD™ CLIP
The SLIDEGUARD™clip crotch strap can be adjusted so that
it fits the seatbelt correctly to the child. The crotch strap length
adjuster can be found under the seat.
A. Adjust the crotch straps for the SLIDEGUARD™ clip so
that the Lap portion of the seatbelt is positioned on the
child's hips and thighs and the clip prevents the lap belt
rising up onto the abdomen. Ensure the SLIDEGUARD™
clip does not push into your child's thighs as this may
cause discomfort.
CAUTION:
ALWAYS USE THE SLIDEGUARD™ CLIP
B. Underneath the base, length of the crotch strap can be
adjusted by threading webbing through the adjuster in
the direction of the arrows shown below.
TO
SHORTEN
SLIDEGUARD™ position
TOO HIGH
IMPORTANT :
You must adjust the crotch strap to the correct length for your child before the child
sits in the seat.
Adjust the crotch strap to its shorter length when using the seat with a smaller child.
The SLIDEGUARD™ clip must always be setup to position the lap belt correctly
on the child's hips and thighs. The occupant may be injured if the SLIDEGUARD™
clip is setup too high. DO NOT attempt to remove or dismantle the crotch strap
and SLIDEGUARD™ clip.
16
Instructions for Installation & Use - Series No. 4000/A/2013
TO
LENGTHEN
SLIDEGUARD™ position
OK
Lower edge of
SLIDEGUARD™,
level with top of
thighs.
Bottom edge of
buckle, level with
top of legs (with
all slack removed
from crotch
strap).