Connecting X5 To Home Network - Russound X5 Installation Manual

CONNECTING XSTREAM X5 TO YOUR HOME NETWORK
1. Plug in power cable. (All other cables, including Ethernet should be
disconnected.) Locate and turn on power switch near AC inlet on the back of
the X5. The XStream X5 will turn on to Access Point Mode. Wait for yellow and
green lights to be solid. Like other Wi-Fi enabled devices, Access Point Mode
will allow you to directly connect to the X5 via Wi-Fi.
Refer to the sticker on bottom of X5 to fi nd host name.
Sticker example:
2. Find hostname in wireless access point list on mobile device and connect.
8 Russound X5 Controller Streamer Amplifi er Installation Manual
3. Open a browser on mobile device or laptop. For iOS (Safari browser),
browse to http://XStrmX5-XXXXXX. local.
Again reference sticker on bottom of unit to fi nd host name.
Alternatively, for other browsers, browse to http://192.168.253.2