Trial Operation - Lava Aire Aviator X2 Instruction Manual

@2012.11-V1.1
n Trial Operation
After installation, fill the water tank with water to the depth of 20 cm. Then you can try to
operate it.
Manual Adding Water：
Insert a hose to the tank through the hole (as shown). DON'T go away while adding water.
You can view the water level through the window (as shown). Stop adding water when it
reaches the highest level.
Window—view
water level
Automatic Adding Water：Please remove the choke plug and then connect the weaved hose
(at the bottom of the tank) to water supply; turn on the faucet and begin adding water; there is
a water level sensor inside the tank. When the tank is full, it will stop inflowing. When water
reaches the lowest level, it would restart inflowing automatically.
When the weaved pipe is apart from the water supply, please screw on the choke plug so as to
avoid water leakage
Aviator X2
Hole for manual
water adding
Page 9 of 15
choke plug