Advertisement
@2012.11-V1.1
Connect the blue outlet pipe to the quick coupling of the Mist Regulating Switch, and
then tie up the orange return pipe and blue outlet pipe with ribbon. (see Picture 5)
Connect the 2-core interface from the Submersible Pump and Level Sensor with the
corresponding interface from the Electricity Box, and fasten the Nuts. (see Picture 6)
Remarks: For ensure waterproof, please make sure the rubber ring is inside the Electric
Wire interface.
Besides, interfaces of Submersible Pump and Level Sensor are two pins, but different
from each other. For avoiding any destroying of interfaces, please don't insert them
violently.
5、Fix Electric Box
Aviator X2
Nut
Picture 5
Picture 6
Page 7 of 15
Make sure the rubber ring is
inside the Electric Wire
interface
Hide quick links:
Advertisement
