Advertisement
@2012.11-V1.1
fasten by sucks installed beneath the pump.
Fasten the Level Sensor with the Nut into the corresponding trench. Make sure the
floater is flapped down like the picture shows.
3、 Combine Main Part and Water Tank
Lock the 4 wheels, and then place the Main Part on the Water Tank. (Picture 3)
Rip off the protective coating of the Electricity Box on the Main Part, take it out and then
fasten the two connecting plate together with 4 M6X20 Butterfly screws. (see Picture 4)
4、Connect the Electric Wire of Submersible Pump and Level Sensor
Aviator X2
Picture 3
Picture 4
Page 6 of 15
When installing,
please align the 2
arrows of the 2 parts.
Hide quick links:
Advertisement
