LevelOne FCS-1060 User Manual page 10

For the MAC address in the "MAC address" field, please check the label on the bottom of the
camera.
The IP addresses shown in the "Current IP Address" field reflect those on the local network. They
may be from the DHCP server. If there is no DHCP server, the camera will try to find a free IP
address (this takes from 15 second to 3 minutes, depending on the LAN status). The method of
finding IP address is seeking from 192.168.0.99, to 192.168.0.254. If any of the address inside
this range is free, the Network Camera will be assigned to this IP address, and its subnet mask
would be 255.255.255.0. If none of the addresses is free, the Network Camera will try the range
from 192.168.0.2 to 192.168.0.98. After an IP address is assigned to the camera, the "Activity"
status LED blinks.
The UPnP function will always assign an IP address for the Network Camera. The Administrator
can click on button "Link to selected device" to connect the I.E. to the camera.
If the camera is not on the Installation Wizard list, click on the "Search" button to search for the
camera on the LAN.
10