Samsung AC444FBRDEH Installation Manual page 17

Setting an indoor unit address (MAIN/RMC)
1. Check whether power is supplied or not.
- When the indoor unit is not plugged in, there should be additional power supply in the indoor unit.
2. The panel(display ) should be connected to an indoor unit to receive option.
3. Before installing the indoor unit, assign an address to the indoor unit according to the air conditioning system plan.
4. Assign an indoor unit address by wireless remote controller.
Option
Indication Details Indication Details
Indication
and Details
0
Option
Indication Details
Indication
and Details
1
Example) If you want to set as "MAIN : 3, CHANNEL : 1, RMC : B",
0
1
assign option codes except SEG 1, 7 which are page options.
Indication Details
0
address
1
setting mode
Indication Details
0
1
setting mode
1
1
The unit digit of
an indoor unit
Indication Details
0~3
Indication Details Indication Details
0~2
3
1 B
digit
0~F
17