Table of Contents
Advertisement
Setting an indoor unit address and installation option
AA
Set the indoor unit address and installation option with remote controller option.
Please use the proper wireless remocon which can set 24 digit option code. Following is the instructions of setting option
option because only 12 digit option setting is available.
Please refer to the wired remocon installation manual for setting with the wired remocon.
The procedure of setting option
Step 1. Entering mode to set option
1.
2. Insert batteries and enter the option setting mode while pressing High Temp button and Low Temp button.
3.
Check if you have entered the option setting status.
Step 2. The procedure of option setting
previous other remocons.
0
2
14
Entering mode for
setting option
High Temp Button
Low Temp Button
1
3
Option setting mode
High Fan Button
Low Fan Button
Advertisement
Table of Contents
