Keyboard Shortcuts; Table 3: Keyboard Shortcuts - D-Link DWL-8600Ap Reference Manual

D-Link Unified Access Point CLI Reference Manual
K S
EYBOARD HORTCUTS
The CLI provides keyboard shortcuts to help you navigate the command line and build valid commands.
the keyboard shortcuts available from the CLI.
Keyboard Shortcut
Ctrl-a
Ctrl-e
Ctrl-b
Left Arrow key
Ctrl-f
Right Arrow Key
Ctrl-c
Ctrl-h
Backspace
Ctrl-w
Ctrl-k
Ctrl-u
Ctrl-p
Up Arrow key
Ctrl-n
Down Arrow key
Ctrl-d
© 2001- 2009 D-Link Corporation. All Rights Reserved
10

Table 3: Keyboard Shortcuts

Action on CLI
Move the cursor to the beginning of the current line.
Move the cursor to the end of the current line.
Move the cursor back on the current line, one character at a time.
Move the cursor forward on the current line, one character at a time.
Start over at a blank command prompt (abandons the input on the current line).
Remove one character on the current line.
Remove the last word in the current command. (Clears one word at a time from the current
command line, always starting with the last word on the line.)
Remove characters starting from cursor location to end of the current line.
(Clears the current line from the cursor forward.)
Remove all characters before the cursor.
(Clears the current line from the cursor back to the CLI prompt.)
Display previous command in history. (Ctrl-p and Ctrl-n let you cycle through a history of all
executed commands like Up and Down arrow keys typically do. Up/Down arrow keys also work
for this.)
Display next command in history. (Ctrl-p and Ctrl-n let you cycle through a history of all executed
commands like Up and Down arrow keys typically do. Up/Down arrow keys also work for this.)
Exit the CLI. (At a blank command prompt, typing Ctrl-d closes the CLI.)
(Typing Ctrl-d within command text also removes characters, one at a time, at cursor location
like Ctrl-h.)
Table 3 describes