Keyboard Shortcuts; Table 32. Keyboard Shortcuts - D-Link DWL-3500AP - AirPremier Wireless Switching 108G Access Point Administrator's Manual

Example 2: Type
property options for the
DLINK-WLAN-AP# remove
basic-rate
bridge-port
bss
interface
mac-acl
snmp-group
snmp-target
snmp-user
snmp-view
supported-rate
traphost
Example 3: Type
property,
get system version

Keyboard Shortcuts

The CLI provides keyboard shortcuts to help you navigate the command line and build valid
commands. Table 32

Table 32. Keyboard Shortcuts

Keyboard Shortcut
Ctrl-a
Ctrl-e
Ctrl-b
Left Arrow key
Ctrl-f
Right Arrow Key
Ctrl-c
Ctrl-h
Backspace
Ctrl-w
Ctrl-k
Ctrl-u
Ctrl-p
Up Arrow key
TAB TAB (including a space after
remove
command.
remove
Basic rates of radios
Bridge ports of bridge interfaces
Basic Service Set of radios
Network interface
MAC address access list item
SNMP user groups
SNMPv3 targets to receive traps
SNMPv3 users
SNMP MIB views
Supported rates of radios
Destination host for SNMP traps
TAB. This will result in completion with the only matching
get system v
. Press ENTER to display the output results of the command.
describes the keyboard shortcuts available from the CLI.
Action on CLI
Move the cursor to the beginning of the current line
Move the cursor to the end of the current line
Move the cursor back on the current line, one character at a time
Move the cursor forward on the current line, one character at a time
Start over at a blank command prompt (abandons the input on the current
line)
Remove one character on the current line.
Remove the last word in the current command.
(Clears one word at a time from the current command line, always
starting with the last word on the line.)
Remove characters starting from cursor location to end of the current
line.
(Clears the current line from the cursor forward.)
Remove all characters before the cursor.
(Clears the current line from the cursor back to the CLI prompt.)
Display previous command in history.
(Ctrl-p and Ctrl-n let you cycle through a history of all executed
commands like Up and Down arrow keys typically do. Up/Down arrow
keys also work for this.)
B CLI for AP Configuration
) to see a list of all
remove
Getting Help on Commands at the CLI 131