Input Selection - Dialing In The Desired Component - Ada PTM-6150 Operation & Installation Manual

Input Selection - Dialing in the desired component.

Front View
1. Dial In New Input
Turn the Input Selector knob
until the second line of the
LCD display reads the
component you wish to
select. As you turn the knob,
you will notice that the top
line of the display still
indicates the current source in
play. Also, this component is
still being routed and
processed by the Cinema
Reference.
2. Engage New Input
Once the second line of the
display indicates the next
component you wish to
access, press the Input
Selector knob to engage this
input. This method permits
you to select an input without
switching all of the inputs you
are scrolling through.
Press Knob
To Activate
Component
The Cinema Reference permits you to scroll to the next input with-
out having all of the components you are passing actively process
through the Cinema Reference. This prevents the clicking that is
commonly associated with changing TV channels up and down. To
best access another component from the front of the Cinema Refer-
ence, turn the Input Selector knob. As you turn this knob, you will
notice that the top row of the LCD display will not change, still indi-
cating the current component in use (in this example, DVD DISC).
The second line of the LCD display will advance through the input
names until the desired component is displayed.
LASER/DVD 1
ALL -02.5 DB
Front Plate
The New
Selection
Side View
LASER/DVD 1
LASERDISC 2
LASER/DVD 1
DVD PLAYER 3
LASER/DVD
VCR
Once the desired component is dis-
played on the LCD's second row,
press the Input Selector knob to
engage that component. The dis-
play will then return to read the new
selection (i.e. DSS TV) along with
the Volume Level.
Chassis Side
1
4
LASER/DVD 1
DSS/SAT 5
DSS/SAT 5
ALL -02.5 DB
Page 7