KEEWAY RKV125 Instruction And Maintenance Manual page 92

5.4.3 Installation
Install braking shoe assembly
Install rear wheel.
Install muffler assembly (24).
Install brake pedal assembly (21).
* Attention
A contaminated braking shoe will reduce braking
performance and result in braking failure.
Tighten bolt and nut to their specified torque value.
Torque value:
Rear wheel locknut: 85-98 N· m
Do not contaminate braking shoe with oil.
If a braking shoe is polluted by oil, clean it with brake
cleaner.
Rear brake:
1. Rear brake disc (5)
2. Locking nut M14× 1.5 (1)
3. Rear wheel rim (7)
4. Brake disc mounting bolt M6× 16 (4)
5. Rolling bearing 6302-2RS (3)
6. Front wheel oil seal assembly (2)
* Attention
A contaminated braking shoe will reduce braking performance
Note: Detailed breakdown drawing refers to P86.
7. Rear wheel damper (10)
8. Bearing spacer (8)
9. Left shaft sleeve assembly (11)
10. Washer φ16×φ32×2 (9)
11. Tubeless tyre 130/70-17 (6)
12 Rear shaft M14× 1.5× 292