Ignition Switch And Steering Lock; Electric Horn; Ignition Switch - KEEWAY RKV125 Instruction And Maintenance Manual

4.7 Ignition Switch and Steering Lock

4.7.1 Inspection
Remove the headlamp from the cover.
Remove ignition switch-wire connector.
Inspect continuity of connector terminal.
This kind of power lock has electromagnetic anti-theft function. When
the switch under the power lock is moved to "OPEN" position, you
can insert key into the keyhole above to operate. When the switch
under the power lock is moved to "SHUT" position, the keyhole above
is closed. You can use "key handle switch" to resume it to "OPEN"
position and the keyhole above is open.
" "(OFF) position: All the circuits are broken.
" "(ON) position: Ignition circuit is switched on and engine can be
started.
" "(Stop) position: Turn the key counterclockwise to " "position,
lock cylinder protrudes, lock the handle pipe.
4.7.2 Ignition switch replacement
Remove the headlamp.
Screw off the mounting bolts and remove the ignition switch holder.
Remove the mounting bolts and replace ignition switch.

4.8 Electric horn

Inspection
Disconnect wire to the electric horn.
Connect lead wire of horn with the battery. When the electric horn sounds, it
indicates the horn is in good condition.