Power Connector - DFI SR100-N User Manual

2
Hardware Installation

Power Connector

Connect a 20-pin ATX main power connector from the power sup-
ply unit to the ATX connector. The system board requires a minimum
of 120 Watt power supply to operate. We recommend that you use
a power supply that complies with the ATX12V Power Supply De-
sign Guide Version 1.1.
54
Important:
The system board consumes a minimal amount of power. Due
to its low power consumption, you only need a 120W to
150W power supply. Every power supply has its minimum 150W 150W
150W 150W
load of power. If you use a greater than 150W power supply,
the power consumed by the system board may not attain its
minimum load causing instability to the entire system.
2 0
1 0
1 1
1
120W to 120W to
120W to 120W to