Disassembly And Assembly Instructions; Removal Of Rear Cover; Removal Of Slot Block; Removal Of Ds-Board - Panasonic TH-65PF20W Service Manual

High definition plasma display
Hide thumbs Also See for TH-65PF20W:
Table of Contents

Advertisement

TH-65PF20W / TH-65PF20T
9 Disassembly and Assem-
bly Instructions
• To disassemble P.C.B., wait for 1 minute after power was off
for discharge from electrolysis capacitors.
,
,
,
and
marks indicate screw positions.
9.1.

Removal of Rear Cover

1. Remove screws (×26
) and then remove the Rear Cover.
9.2.

Removal of Slot Block

1. Disconnect the connectors (DS13, P9).
2. Remove the flexible cable from the connector (DS1).
3. Remove 4 screws and then remove the Slot Block.
9.3.

Removal of DS-Board

1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Turn over the Slot Block.
9.5.

Removal of A-Board

1. Remove the HX-Board Block.
, ×4
, ×18
) and M8 Cap (×4
3. Remove 6 screws and then remove DS-Board.
9.4.

Removal of HX-Board

1. Disconnect the connector (A14).
2. Remove 2 Hexagonal-Head screws, 5 screws ( ) and 2
screws ( ) and then remove the HX-Board Block.
3. Turn over the HX-Board Block.
4. Disconnect the connector (HX1).
5. Remove 4 Hexagonal-Head screws and 1 screw of HX-
Board and then remove HX-Board.
(Refer to Removal of HX-Board)
2. Disconnect the connectors (A5, A8, A9, A10, A11, A13,
22

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Th-65pf20t

Table of Contents