Removal Of C3-Board; Removal Of S1-Board; Removal Of Front Glass, V1, V2-Board And Cabinet Assy - Panasonic TH-65PF20W Service Manual

9.18. Removal of C3-Board

1. Remove 6 screws and then remove the Hanger Assy L
and the Stand Cover L.
2. Disconnect the connectors (C35).
3. Remove the flexible cables from the connectors (C31,
C33, C36).
4. Remove 10 screws ( ) and then remove the flexible
cables from the connectors (CB11, CB12, CB13, CB14,
CB15).
5. Remove 6 screws ( ) and then remove C3-Board.

9.19. Removal of S1-Board

1. Remove 2 screws (B) and then remove the S1-Board
Block.
2. Disconnect the connector (S35).
3. Remove 1 screw (C) and then remove S1-Board.
4. Remove the Switch Attachment from S1-Board.
9.20. Removal of Front Glass, V1,
V2-Board and Cabinet Assy
1. Remove the S1-Board Block.
(Refer to Removal of S1-Board)
2. Disconnect the connectors (A11, A22).
3. Remove 12 screws ( ).
4. Pull the bottom of the Plasma Display Panel forward
(arrow1).
5. Slide the Plasma Display Panel and then remove the
Plasma Display Panel (arrow2).
9.20.1. Removal of Front Glass
1. Remove 28 screws ( ) and then remove the Fixed Angle
(left, right, upper, bottom).
2. Remove the Front Glass.
27
TH-65PF20W / TH-65PF20T