9.12. Removal of SU-Board and SD-
Board
1. Remove the flexible cables from the connectors (SU1,
SU2, SU3, SU4, SU5, SU11, SD1, SD2, SD3, SD4, SD5,
SD11).
2. Disconnect the connectors (SU41, SD42, SD46).
3. Remove 6 screws ( ).
4. Remove 4 screws ( ) and then remove SU-Board and
SD-Board.
Note: when fixing SU-Board and SD-Board
• Screw on 2 screws (1) firstly.
9.13. Removal of SC-Board
1. Disconnect the connectors (SC2, SU41, SD42, SD46).
2. Remove the flexible cable from the connector (SC20).
3. Remove 10 screws ( ).
4. Remove 4 screws ( ) and then remove SC-Board.
9.14. Removal of SS-Board
1. Remove the HX-Board Block.
(Refer to remove of HX-Board).
2. Disconnect the connectors (A8, A9, A10, A11, A13, A22,
A25, A35, PB32, PB33, PB34, PB35).
3. Remove the flexible cables from the connectors (A1, A20,
A31, A32).
4. Remove 5 screws ( ) and then remove the A-Board
Block.
Note: when fixing A-Board Block
• Put the flexible Cable between the Fixed Metal and A-
Board when connect the flexible Cable to the connector
(A1).
25
TH-65PF20W / TH-65PF20T