Assembling The Device; Charge The Battery - Videocon A42 User Manual

Getting Started
Assembling the device
1. Locate the groove at the bottom of the device and
gently remove the back cover by pulling it up from the
device.
2. Insert the SIM cards into their respective slots as
shown below.
3. Insert memory card. Take compatible micro SD card,
and place it into its respective slot.
4. Replace the battery. Align the contacts of the
battery with the corresponding connectors in the
battery compartment & place the back cover.
Charge the battery
To charge the device battery:
1. Take the USB cable from the device packaging, and
attach it to power adapter. Now connect the power
adapter into a standard AC wall outlet.
2. Connect the mini USB connector on the cable into
its designated port in the device. The battery level
indicator on the device screen will start scrolling
horizontally to indicate that the battery is being charged.
Note: Exercise extreme caution while connecting the
charger to the device. The connectors on the charger
and on the phone may get damaged if too much force is
applied while connecting them.
7