Sar; Getting Started; Assembling The Device - Videocon A55 HD User Manual

without limitation, the availability of any feature or
content) of the phone at any time without prior
notice.
Content and services are transmitted by third parties
by means of networks and transmission facilities over
which VIDEOCON has no control. Without limiting the
generality of this disclaimer, VIDEOCON expressly
disclaims any responsibility or liability for any
interruption or suspension of any content or service
made available through this device.
VIDEOCON is neither responsible nor liable for
customer service related to the content and services.
Any question or request for service related to content
or services should be made directly to respective
content and service providers.
"It is recommended to install the third party
applications on memory card rather than phone
memory for best performance."
"Memory Capacity - Memory capacity is dependent
on Operating System usage. Available storage
capacity may be less as it includes pre-installed
operating system, such as Android and/or pre-
installed applications, or media content, shared
video/system memory."

SAR

Your phone meets the SAR requirements for
exposure to radio waves, recommended by Govt. of
India. Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured so as not to
exceed the limits for exposure to radio-frequency (RF)
energy, as recommended by the Govt. of India. These
limits are part of comprehensive guidelines and
establish permitted levels of RF energy for the
general population. The limits include a substantial
safety margin designed to ensure the safety of all
persons, regardless of age and health.
The exposure standard for mobile phones employs a
unit of measurement known as SAR (Specific
Absorption Rate). The SAR limit recommended by the
Govt. Of India is 1.6 Watt/kg taken over a volume
containing a mass of 1 gram of tissue. The highest
SAR value for A55 is 0.000 W/Kg. Press *#07# to
check the SAR value on your phone display.

Getting Started

Assembling the device

1. Locate the groove at the bottom of the device and
gently remove the back cover by pulling it up from
the device.
4