Warranty Certificate; Warranty Terms - Opop ECOMAX 25kW User Manual

12. WARRANTY CERTIFICATE

covering ECOMAX 25, ECOMAX 35, ECOMAX 42 hot water boiler, fabrication no.
Manufacturer: OPOP spol. s r.o., Valašské Meziříčí
Tel.: 571 675 589, Fax.: 571 611 225
Shipped from the plant:_________________________________________

Warranty terms:

The present warranty sheet contains quality and completeness certificates. The manufacturer confirms that the product has been checked and
proved to conform, with its design, to the technical conditions and ČSN EN 303-5. We provide the warranty for the quality, function and
workmanship of the boiler during 24 months of the sale to the respective customer, yet for the maximum of 30 months from removal
from the production plant, namely by pledging to remove any defects demonstrably due to faulty material, design or workmanship within as
little time as possible at our own expense, provide that the boiler:
• is in regular technical condition as stipulated in the operating manual
is connected to a chimney vent to ČSN 73 4201:1989
•
has not been mechanically damaged with force (there has been no unauthorised interventions save for any action provided
•
for in the Operating Manual)
the chimney draught to ČSN must correspond to the value indicated in Table 2, depending on the boiler type
•
the customer submits the present warranty certificate, duly filled in, when lodging a complaint
•
the manufacturer's instructions governing the use of pressure expansion vessels have been adhered to
•
Note:
When notifying a defect, the present Warranty Certificate must be submitted at all times, and the exact address and the circumstances, in which the defect
occurred must be indicated. Our company will decide on the method and place of repair.
Technical check completed on________________________
Note:
For the steel weldment – we guarantee its lasting tightness during 60 months from removal from the production plant. The present warranty
is preconditioned by the fact that no pressure expansion vessel has been used in the heating system and the leakage has occurred due to
low-quality material or welding work. The warranty cannot be enforced for faults down to the operators. If the warranty claim is
acknowledged during an extended warranty term, we will provide the user with a replacement steel weldment using unit transport or
personal delivery. The costs associated with the transport, replacement and return of the faulty weldment to the production plant shall be
borne by the user. Unless the faulty weldment is returned to the production plant within 30 days of its dispatch or handover
of a replacement weldment, the weldment will be charged to the user at its full value.
A warranty term of 24 months from collection applies to the weldment replaced under the extended warranty term, i.e. 60 months.
The boiler weldment is treated with black water paint which may lead to the peeling of the coat. The peeling coat shall have no effect
on the function of the boiler. After the first firing up, the coat will get burn out.
Sold on ______________________
19 Page