Description Of The Connection - Opop ECOMAX 25kW User Manual

10.2

Description of the connection

The controller is powered up by 230V/50Hz network using a network cable with a bent plug and CEE7/7 connector. The IEC 320
C13 network socket case accommodates a protective 2A/T tube fuse. The power part of the controller is screwed onto the inside
of the boiler's sheet case, equipped with passages and a flat patching cable for the Ecomax control panel. The opening
in the bottom right-hand side corner of the base serves the conducting of the cabling under the boiler's sheet shell.
PE L N PE N
PE L N PE N
fuse
1A/T
MS PE N MC KP KP T1 T1
MS PE N MC KP KP T1 T1
PE N MV
PE N MV
17
G TS G TA G R
G TS G TA G R
G UT
L
G UT
L
Page