Receiver Connections; Gate Travel Distance / Setting The Limit Switches - Eagle II Installation Manual

EAGLE-II Swing Gate Operator
____________________

Receiver Connections

The Receiver Terminal is mounted on the control box for easy
installation and is pre-wired for a 3-wire or 4-wire receiver.
3-Wire Connections
4-Wire Connections
(24V) (24V)
COMMON COMMON
GRD GRD
Receiver Connections
on the Eagle Diamond
Board
____________________

Gate Travel Distance / Setting The Limit Switches

The limit switches must be set so that the gate stops at the proper
position.
Limit Switches
1
Loosen Screws
2
Make Adjustments
3
Tighten Screws
Eagle Access Control Systems, Inc. / (800) 708-8848 / www.eagleoperators.com
(17)