Output Connections - Eagle II Installation Manual

Describing The Output Connections
MAG Lock Solenoid Connections (24 VDC)
The Control Board provides a 24VDC
and relay output for MAG Locks
or Solenoids.
The Control Board provides 24 VAC Power,
which can be used for loop detectors
and receivers.
Eagle Access Control Systems, Inc. / (800) 708-8848 / www.eagleoperators.com
EAGLE-II Swing Gate Operator
____________________
Alarm (12 VDC)
Safety Alarm: If the gate hits an obstruction
twice while closing or opening, the system will
shut down for 5 minutes. On the Board, you
have two options of reset mode.
Power (24 VAC)
(15)
Entire Output Section