Setting An Indoor Unit Installation Option - Samsung AJ009JNNDCH Service Manual

5. The MAIN address is for commnication between the indoor unit and the outdoor unit. Therefore, you must set it to
operate the air conditioner properly.
Setting an indoor unit installation option (suitable for the condition of each installation location)
1. Check whether power is supplied or not.
- When the indoor unit is not plugged in, there should be additional power
supply in the indoor unit.
2. The panel(display ) should be connected to an indoor unit to receive option.
3. Before installing the indoor unit, assign an option to the indoor unit according
to the air conditioning system plan.
- The default setting of an indoor unit installation option is "02000-100000-200000-300000".
- Individual control of a remote controller(SEG20) is The function that controls an indoor unit individually when there is
more than one indoor unit.
4. Set the indoor unit option by wireless remote controller.
- When entering Address option, connect remote controller receiver.
Option SEG1
Explanation PAGE
Indication Details Indication
Indication and Details
0
Option SEG7
Explanation PAGE
Indication Details Indication
Indication and Details
1
Option SEG13
Explanation PAGE
Indication Details Indication
Indication and Details
2
Option SEG19
Explanation PAGE
Indication Details Indication
Indication and Details
3
If you input a number other than 0~4 of the individual control of the indoor unit(SEG20), the indoor is set as "indoor 1".
1) The window on/off function applies to the following unit
- AJN**/AR**
4-10
SEG2
MODE
Details Indication
2
SEG8
Details Indication
0
SEG14
External control External control output
Details Indication
0 No use
0
1 On/Off control
2 Off control
1
Window On/Off control 1)
3
SEG20
Details Indication
0
1(L)
2(N)
SEG3 SEG4
Central control
Details Indication Details Indication Details Indication Details
0 0
SEG9 SEG10
Details Indication Details Indication Details Indication Details
0 0
SEG15 SEG16
Details Indication Details Indication Details Indication Details
Thermo ON 0
0
Operation ON 1
SEG21 SEG22
Details Indication Details Indication Details Indication Details
0 0
Indoor Unit
F2
F1
SEG5 SEG6
0 No use
0
1 Use
SEG11 SEG12
Master / Slave
0 Slave
0
1 Master
SEG17 SEG18
Buzzer
Use
0
No Use
SEG23 SEG24
0 0
Samsung Electronics