2. Apply the power to the outdoor unit.
Outdoor unit will try to communicate the number of indoor units specified by SW01 on outdoor display PCB.
"Normal display" means, right 2 digit of
LED on Display PCB displays '00' and
left 2 digit of LED displays indoor unit
Check the indoor unit, outdoor unit or wiring
2.
Pipe Checking Operation (Auto Addressing Mode)
Automated checking of pipe connection (Auto addressing option)
-During these 60 seconds,the left dispaly DIS01 will show sequentially 00-01-02-03-...15-00.
-It means you didn 't do "Pipe check operation"
displaying as below.
2.
Display
[DIS 01 ] is flickering on the setting time.
Time duration
4-18
Does LED show "Normal display"?
address number.
No
Is error code started with ''
''
displayed on the LED?
Yes
according the error code table.
Button [K1] 1 times
DIS 01
DIS 02
Outdoor Temperature
or more
(Cool mode)
5min~10min
OK : This number is displayed
Yes
only while communicating,
so each number is displayed
for a short time in order.
No
Nothing is displayed on the LED.
Check the power source,
power cable & FUSE on
the outdoor unit.
less than
(Heat mode)
20min~50min
Samsung Electronics