Connecting The Cables - Lenovo THINKSERVER RS210 Hardware Maintenance Manual

5. Update the server configuration (see "Updating the server configuration" on page 175).
6. Slide the server back into the rack, if necessary.
7. Turn on the peripheral devices and the server.

Connecting the cables

The following illustration shows the locations of the input and output connectors on the front of the
server.
1
Power-on LED
2
Power-control button
3
Reset button
4
Hard disk drive activity LED
5
Locator LED
174
ThinkServer ThinkServer RS210, Types 6531, 6532, 6533, and 6534: Hardware Maintenance Manual
6
System-error LED
7
USB 1 connector
8
USB 2 connector
9
Hard disk drive activity LED (green)
10
Hard disk drive status LED (amber)