Installing Or Removing The Thinkserver Raid 500 Upgrade Key For Advanced Raid - Lenovo ThinkServer TD230 Hardware Maintenance Manual

4. Remove the RAID 5 key from the SATA key connector on the system board. See "Locating parts on the
system board" on page 33.
Figure 47. Removing the RAID 5 key
5. If you are instructed to return the removed RAID 5 key to the manufacturer, follow all packaging
instructions and use any packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the removal procedure, go to "Completing the parts replacement" on page 122.
Installing or removing the ThinkServer RAID 500 Upgrade Key for
Advanced RAID
This section provides instructions on how to install or remove the ThinkServer RAID 500 Upgrade Key for
Advanced RAID (hereafter called the TR 500 key). If your server has a ThinkServer RAID 500 Adapter
installed and you want to enable the RAID 5 configuration function for this adapter, you need to install
the TR 500 key on the adapter.
Installing the TR 500 key
Attention:
Do not open your server or attempt any repair before reading and understanding the Safety Information and the
Warranty and Support Information on the ThinkServer Documentation DVD that came with your product, and
"Guidelines" on page 39. To obtain a copy of the publications, go to:
http://www.lenovo.com/support
This section provides instructions on how to install the TR 500 key.
To install the TR 500 key , do the following:
Attention: Electrostatic discharge (ESD) can damage the TR 500 key. Always ground yourself and use a
ground strap before touching the option. Perform the following procedure at an ESD-safe workstation.
.
Chapter 5 Replacing FRUs
79