Lenovo ThinkServer TD230 Hardware Maintenance Manual page 154
Machine types: 1027, 1029, 1039, and 1040
Hide thumbs
Also See for ThinkServer TD230:
- Installations- und benutzerhandbuch (162 pages) ,
- Guía del usuario y de instalación manual (162 pages) ,
- Manual d’installation et d’utilisation (160 pages)
Table of Contents
Advertisement
Table 25. Submenus under the PCI Configuration
Maximize Memory below 4 GB
Memory Mapped I/O above 4 GB
Onboard Video
Dual Monitor Video
Onboard NIC1 ROM
Onboard NIC2 ROM
Onboard iSCSI ROM
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 26. Submenus under the System Acoustic and Performance Configuration
Item
Set Throttling Mode
Altitude
Set Fan Profile
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 27. Items under the Security menu
Item
Set Administrator Password
Set User Password
Front Panel Lockout
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 28. Items under the Server Management menu
Item
Assert NMI on SERR
Assert NMI on PERR
Resume on AC Power Loss
Clear System Event Log
148
ThinkServer TD230 Hardware Maintenance Manual
Item
[Auto] / [OLTT] / [CLTT]
300m or less / [301m-900m] /
901m-1500m / Higher than 1500m
[Performance] / Acoustic
[Disabled] / Enabled
[Enabled] / Disabled
[Enabled] / Disabled
[Stays Off] / Last state / Reset
[Disabled] / Enabled
[Disabled] / Enabled
[Disabled] / Enabled
[Enabled] / Disabled
[Disabled] / Enabled (If enable this option, the system can
support the add-in graphics card.)
[Enabled] / Disabled
[Enabled] / Disabled
[Disabled] / Enabled
Option
Set the throttling mode.
Set the altitude.
Select the priority for the system fan
control method.
Option
Set or change the administrator
password. The password can be
any combination of up to 7 (1 to 7)
alphabetic and numeric characters.
Set or change the user password. The
password can be any combination
of up to 7 (1 to 7) alphabetic and
numeric characters.
If this option is set to Enabled, the
power button and reset button on the
front panel will be locked.
Option
If the power is interrupted when the
server is on, after the power resumes,
the server will restart automatically,
or keep the off state, or resume to the
last state.
Option
Description
Description
Description
Advertisement
Table of Contents
