Leds For The Ethernet Connectors; Locating Server Components - Lenovo ThinkServer TD230 Hardware Maintenance Manual

Table 3. Hot-swap hard disk drive status LEDs
Hot-swap hard disk drive status LED
1
Hot-swap hard disk drive present LED
2
Hot-swap hard disk drive activity LED

LEDs for the Ethernet connectors

The Ethernet 1 and Ethernet 2 connectors have two status LEDs that indicate the LAN connection and
activity of the connection.
Table 4. Ethernet LEDs
LED
RJ-45 Linkage and Activity (left)
RJ-45 Linkage and Activity (right)

Locating server components

Figure 6 "Server component locations (side view without the server cover)" on page 33 shows the locations
of the major components in your server. To remove the server cover and gain access to the inside of the
server, see "Removing the server cover" on page 43.
32
ThinkServer TD230 Hardware Maintenance Manual
State
On
Off
On
Off
State Color
On Green
Blinking Green
Off Off
On Amber
On Green
Off Off
Description
The hot-swap hard disk drive is present.
The hot-swap hard disk drive is not present.
The hot-swap hard disk drive is active.
The hot-swap hard disk drive is not active.
Description
10/100/1000 Mb linked
10/100/1000 Mb activity
No LAN connection.
1000 Mb linked and active
100 Mb linked and active
10 Mb mode or no LAN connection.