Chapter 3. Connecting devices to the projector
This chapter provides information on connecting devices to the C500 projector.
Connecting devices
Computers and video devices can be connected to the projector at the same time. Check the user's
manual of the connecting device to confirm that it has the appropriate output connector.
A DVI-I
B RGB in
C RGB out
D RS-232
E USB
F Audio-in
G Audio-out
H L-Audio in-R
I Video
J S-video
K Component video in
Attention: As a safety precaution, disconnect all power to the projector and devices before making
connections.
© Lenovo 2006. Portions © IBM Corp. 2005.
A
B
DVI-I IN
RGB IN
Y
P
/C
P
/C
B
S
R
R
S-VIDEO IN
VIDEO IN
COMPONENT VIDEO IN
K
J
I
Connect the supplied DVI-A cable or a DVD-D cable (not supplied) from a computer
Connect a VGA cable (not supplied) from a computer
Connect a VGA cable (not supplied) to a monitor
Reserved for installation control and firmware updates
Connect the supplied USB cable from a computer
Connect an audio cable (not supplied) from the computer's audio-out connector
Audio loop-through
Connect the audio cable (not supplied) from an audio input device
Connect the supplied composite video cable from a video device
Connect the supplied S-video cable from a video device
Connect a component video cable (not supplied) from a video device
C
D
E F
RGB OUT
RS-232C
USB
L-AUDIO IN-R
AUDIO OUT
H
G
AUDIO-IN
3-1