Network Setting - Lenovo C500 User Manual

Item
Cancel
Input sources
Function
Video Type
Video AGC
Projection
Frequency
Tracking
Digital Zoom
Cancel

Network Setting

To access the Network setting menu,
1. Press the Menu button to open the On-screen Display.
2. Press the left or right cursor button to move to the Setup menu.
3. Press the up or down cursor button to move to the Network Setting menu and then press the Enter
button.
4. Press the left or right cursor button to change values for settings and then press Enter to confirm the
new setting.
5. If you wish to cancel all changes made within the Network Setting menu, select Cancel and press the
Enter button.
6. Press Menu to confirm the new settings and leave the Network Setting menu.
Item Description
IP Address State Press the left of right cursor button to toggle between DHCP and Static.
Select DHCP (Dynamic Host Configuration Protocol) if your router
automatically assigns temporary IP addresses. If you select Static, you
must manually assign an IP address, subnet mask, default gateway, and
DNS server.
5-10
Lenovo C500 Projector User's Guide
Description
Cancels changes made in the On-screen Display
screen and returns all parameters to their
previous settings.
RGB DVI
x x
x
x
x
x x
Default
n/a
Component video Composite video
x
x
x
x
x
x
SVideo
x x
x x
x x
x x
x x
Default
DHCP