Removing And Replacing Memory - Lenovo ThinkCentre 8098 Hardware Maintenance Manual

Removing and replacing memory

1. Open the cover. See "Opening the cover" on page 138.
2. Locate the memory connectors. See "Identifying parts on the system board" on
3. Open the retaining clips to remove an existing memory module.
4. Make sure the memory module notch 1 is aligned correctly with the
5. To complete the installation, go to "Closing the cover and connecting cables"
page 140.
connector key 2 on the memory connector. Insert the memory module
straight down into the connector until the retaining clips close.
on page 159.
Chapter 10. Replacing FRUs (Types 8098, 8171, 8172, 8173, 8424, and 8425)
141