Removing and replacing memory
1. Remove the cover. See "Removing the cover" on page 116.
2. Locate the memory connectors. See "Identifying parts on the system board" on
3. Open the retaining clips to remove an existing memory module.
4. Make sure the memory module notch 1 is aligned correctly with the
5. To complete the installation, go to "Replacing the cover and connecting the
page 118.
connector key 2 on the memory connector. Insert the memory module
straight down into the connector until the retaining clips close.
cables" on page 135.
Chapter 9. Replacing FRUs (Types 8143, 8144, 8146, 8422, 8423, and 8427)
119