Identifying parts on the system board
Removing and replacing a memory module
1. Open the cover. See "Opening the cover" on page 90.
2. Locate the memory connectors. See "Identifying parts on the system board."
3. Open the retaining clips and remove the failing memory module.
92
Hardware Maintenance Manual
1 Hard disk drive connector
2 Optical drive connector
3 PCI riser connector
4 12v power connector
5 Power connector
6 Front fan connector
7 Microprocessor
8 Speaker connector
9 Memory connector 1
10 Memory connector 2
11 Rear fan connector
12 SATA connector
13 Clear CMOS/Recovery jumper
14 Battery