Getting Connected; Connecting The Power - VocoPro PV-400 Owner's Manual

Getting Connected

CONNECTING THE POWER

1 . Connect the correct end to the AC Input on the rear panel of the PV-400 .
2 . Connect the other end to a surge protector, power strip or wall outlet .
Note: It is recommended that you use a surge protector to protect the speaker from any unexpected power surges,
which could result in a defective product and will void the warranty.
CONNECTING TO A SECOND UN-POWERED SPEAKER
WHAT YOU WILL NEED:
• Speakon speaker cable (included)
• Second speaker with Speakon jack (included)
1 . Connect one end of the Speakon speaker cable to the Speakon jack on the rear panel of the PV-400 .
2 . Connect the other end of the Speakon speaker cable to the Speakon input jack on a non-powered speaker .
MODEL: PV-400
POWERED STEREO 8" VOCAL SPEAKERS
LA VERNE, CALIFORNIA
U.S.A.
CAUTION
RISK OF ELECTRICAL SHOCK
LOCK
UNLOCK
OUTPUT LEFT SPEAKER
UNLOCK
OUTPUT LEFT SPEAKER
MODEL: PV-400
POWERED STEREO 8" VOCAL SPEAKERS
LA VERNE, CALIFORNIA
U.S.A.
CAUTION
RISK OF ELECTRICAL SHOCK
LOCK
UNLOCK
INPUT LEFT SPEAKER
8
ON
POWER
115V
VOLTAGE SELECT
AC INPUT
~230V-115V/50-60HZ