Safety 8. Ventilation - The appliance should be situated so its CAUTION location does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the RISK OF SHOCK ventilation slots.
1. To ensure the finest performance, please read this requirements. Modifications not expressly approved by manual carefully. Keep it in a safe place for future Vocopro may void your authority, granted by the FCC, to reference. use this product. 2. Install your unit in a cool, dry, clean place - away from 2.
And while you're there don't forget to check out our Club VocoPro for Karaoke news and events, chat rooms, club directories and even a KJ Service directory! We look forward to hearing you sound like a PRO, with VocoPro, the singer’s ultimate choice. FOR YOUR RECORDS Please record the model number and serial number below, for easy reference, in case of loss or theft.
Now it’s time to consider how you can maximize the fun and excitement your equipment offers. VocoPro and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing.
Getting Started The PV-400 400W Max Powered Speaker system is self-powered and does not need an external amplifier to supply it with power . This means you can connect any mixer, player or other audio device directly to its Stereo RCA Audio Inputs for instant sound .
• Second speaker with Speakon jack (included) 1 . Connect one end of the Speakon speaker cable to the Speakon jack on the rear panel of the PV-400 . 2 . Connect the other end of the Speakon speaker cable to the Speakon input jack on a non-powered speaker .
Page 9
1 . Connect one end of the 1/8” stereo cable into your audio source output . 2 . Connect the other end of the 1/8” stereo cable to the 1/8” input on the rear panel of the PV-400 . Note: 1/8” & RCA inputs will overlap if sources are played simultaneously.
Page 10
1 . Connect one end of each RCA cable to the RCA audio left and right inputs on the recording device . 2 . Connect the other end of each RCA cable to the left and right RCA Line Out jacks on the rear panel of the PV-400 . VOLUME...
Note: This input will overlap the RCA Inputs if played simultaneously. To isolate this input, stop/pause audio on any other input connected. 8 . Power - This switch powers the PV-400 ON/OFF . 9 . AC Power Input - Plug the power cable in here .
. 2 . Align the slots on the flat part of the adapter with the holes on the bottom of the PV-400 speaker . Note: Make sure the adapter is attached firmly to the speaker.
• 115V - North America, Canada, some South America POWER • 230V - Europe, Asia, some South America Note: The PV-400 comes preset to 115V and will only need to be switched if it is being used in a region that requires 230V. TO SWITCH THE VOLTAGE POWER 1 .
1. There is no sound coming out of either of the speakers. • Make sure the power is on • Make sure the PV-400 volume is turned up . • Make sure all cables are securely connected to the proper jacks • Make sure there are no damaged or bad cables • Make sure all other devices (players, mixers, etc .
Need help?
Do you have a question about the PV-400 and is the answer not in the manual?
Questions and answers