PACOM H264 User Manual page 22

User's Manual
NOTE: The DVR provides four different recording modes. View only mode — No recording will be made during
selected hours. Time-lapse mode — Time-lapse recording will be made during selected hours. Event mode —
Event-driven recording will be made during selected hours. Time & Event mode — Time-lapse recording will be
made during selected hours and the DVR will go into the event-driven recording mode during selected hours when
an event occurs.
 Event mode (E=smovti): Click the desired event(s) button to be associated with the event recording mode. Click
the event button to toggle On and Off. Various recording modes (e.g. R, R/s, s, mo, smov, R/smov, R/E, etc) may
display in the time table according to settings of user defined Event modes. If you select all available events, and E
will display in the selected cells.
NOTE: Video Loss (v) in Event mode includes both video loss and video obscuration detection.
 Quick setup: Select the desired button to adjust the current settings of the selected camera to another camera. Click
the Copy button, and select another camera to be scheduled by clicking the camera icon in the same dialog box, and
then click the Paste button. Click the Apply all button if you want to adjust the current settings to all cameras.
 Set up holiday...: Set up holidays. This function compensates for different holidays in different countries.
 Stop Rec. Warning...: Click the button to notify when recording stops.
16
Click the date in the calendar you want as a holiday, and click the
Add button. The selected date will be displayed in the list next to
the calendar. If you want to delete a holiday, click the Delete button
after selecting the date in the list. Move to other months using the
arrow buttons located at the top of the calendar. You can save your
changes by clicking the OK button. Selecting Cancel exits the
Holiday setup dialog box without saving the changes.
Check the Warning when rec. stops box.
− Rec. stoppage reason: Check the Click rec. stop button box to
notify when recording stops by clicking the Recording mode button.
Check the No rec. during specified time box to notify when the
DVR does not record during the preset time (1 to 24 hours).
− On rec. stop: Select how to notify when recording stops.