Cornering Lamps - Mercedes-Benz Sprinter Operator's Manual

Changing bulbs
98
Low-beam headlamps and high-beam
headlamps/cornering lamp
Switch off the lighting system.
X
Open the hood (
X
Press catches : down.
X
Lift housing cover ; in the direction of the
X
arrow and remove it.
Connector for low-beam headlamps
=
Connector for high-beam headlamps
?
(halogen headlamps)/cornering lamps
(Bi-Xenon headlamps)
Remove corresponding connector =
X
or ? from the bulb.
Detach the locking spring and remove the
X
bulb.
Insert the new bulb in such a way that its
X
base fits into the recess of the bulb holder.
Attach the locking spring and plug the
X
connector onto the bulb.
Insert housing cover ; into the lower
X
mounting points.
page 240).
Y
Fold housing cover ; against the
X
headlamp casing.
Push catches : up until you feel them
X
engage.
Close the hood.
X
Turn signal lamps
Switch off the lighting system.
X
Open the hood ( page 240).
X
Y
Turn bulb holder : counter-clockwise and
X
remove it.
Turn the bulb counter-clockwise, applying
X
slight pressure, and remove it from bulb
holder :.
Press the new bulb into bulb holder : and
X
screw it in clockwise.
Insert bulb holder : into the lamp and turn
X
it clockwise to tighten.
Close the hood.
X
Standing lamps and parking lamps