INSTRUCTION MANUAL
Change the way you think about time
1. How to read the time
• Press button A to display the time.
• All LEDs will light up and the time will be shown.
• The current time is indicated by the blinking LEDs.
• The time display will turn off after 7 seconds.
Hours Ring 1-12
PM / Charging Indicator
Button A
Minutes Ring
Groups of 5
Button B
5, 10, 15, 20, etc
Single Minutes Ring
1-4
Examples
2. How to set the time and animation
• Press and hold button B for 3 seconds to enter setting
mode.
*Note after 7 seconds of inactivity setting mode will
12:06
10:17
deactivate*
I. Setting the hour
• The hour LEDs will flash when you are in hour setting
mode.
• Press button A to increase the hours as required.
• The PM indicator will flash to indicate PM mode.
• Press button B to confirm and move to the minutes.
12 o'clock light is flashing
10 o'clock light is flashing
5 minute light is flashing
15 minute light is flashing
1 minute light is flashing
2 minute lights are flashing
II.Setting the minutes
• The minute LEDs will flash when you are in minute
setting mode.
• Press button A to increase the minutes as required.
• Press button B to confirm and move to the animation.
III.Setting the animation
This watch has a light-up animation feature. The LEDs
will animate once every 15 minutes between 6pm and
12am.
• In setting mode, when the animation feature is on,
PM / Charging Indicator
the LEDs will animate.
• In setting mode, when the animation feature is off,
all LEDs will flash.
• Press button A to turn the animation on or off.
• Press button B to confirm and when the LEDs go out,
setting is complete.
*Note after 7 seconds of inactivity setting mode will
deactivate*
Need help?
Do you have a question about the Satellite-X and is the answer not in the manual?
Questions and answers