1. How to read the time • Press button A to display the time. • All LEDs will light up and the time will be shown. • The current time is indicated by the blinking LEDs. • The time display will turn off after 7 seconds. Hours: 1-12 Minutes: Groups of 5 5, 10, 15, 20, etc...
Page 4
2. How to set the time and animation • Press and hold button B for 3 seconds to enter setting mode. *Note after 7 seconds of inactivity setting mode will deactivate* I. Setting the hour • The hour LEDs will flash when you are in hour setting mode.
Page 5
II. Setting the minutes • The minute LEDs will flash when you are in minute setting mode. • Press button A to increase the minutes as required. • Press button B to confirm and move to the animation. III. Setting the animation * This watch has a light-up animation feature.
3. How to recharge the battery • This watch has a USB rechargeable battery. • When the lights become dim or do not light up, you should recharge the battery. • To recharge the battery, unscrew the USB cap using the screw driver provided and connect the USB charging cable to the USB charging jack.
Page 7
4. User informations I. Battery • This watch uses an LIR 2032 rechargeable battery only. • The LIR 2032 rechargeable battery is replaceable. • Battery lifetime will vary depending on use, but is estimated at approximately 300 charges. • To maximize battery life, turn the animation off. •...
SPECIFICATIONS Case Materials Wood Strap Materials Wood Case Dimensions 42.5mm x 50mm x 14mm Finish Clear Coating Maximum Fit 210mm (approx.) Wrist Size Weight Display LED Digital Tube Battery 3.6V LIR 2032 Rechargeable...
Need help?
Do you have a question about the RPM and is the answer not in the manual?
Questions and answers