Page 3
1. How to read the time • This watch uses an LCD “always on” display to show the time. • You can illuminate the display for a short time with the EL backlight by pressing button A. • The time is displayed digitally on three sides of the cube as shown in the diagrams below.
Page 4
2. How to read the date • Press button B to display the date. • The date icon indicates that you are in date mode. • You can illuminate the display for a short time with the EL backlight by pressing button A. •...
Page 5
3. How to set the date and time • Press and hold button B for 3 seconds to enter setting mode. *Note after 10 seconds of inactivity setting mode will deactivate I. Setting the year • The year digits will flash when you are in year setting mode.
Page 6
IV. Setting the hour • The hour digits will flash when you are in hour setting mode. • The PM icon in setting mode indicates that you are setting the time in PM. • Press button A to increase the hour as required. •...
Page 7
4. User information I. Battery • This watch uses an CR2016 replaceable watch battery. • Battery lifetime will vary depending on use, but is estimated to last for at least one year. • To maximize battery life you should limit use of the EL backlight.
SPECIFICATIONS Case Materials Stainless Steel Strap Materials Stainless Steel Case Dimensions 38 x 42 x 8.3 mm Finish Polished Maximum Fit 210mm (approx.) Wrist Size Weight 120g Display Colored LCD with EL Backlight Battery CR 2016 Water Resistance 3 ATM...
Need help?
Do you have a question about the 3D Unlimited and is the answer not in the manual?
Questions and answers