1. How to read the time • Press button A to display the time. • All LEDs will light up and the time will be shown. • The current time is indicated by the blinking LEDs. • The time display will turn off after 7 seconds. Hours Ring 1-12 PM / Charging Indicator Minutes Ring...
Page 4
Examples 12:06 10:17 12 o’clock light is flashing 10 o’clock light is flashing 5 minute light is flashing 15 minute light is flashing 1 minute light is flashing 2 minute lights are flashing...
Page 5
2. How to set the time and animation • Press and hold button B for 3 seconds to enter setting mode. *Note after 7 seconds of inactivity setting mode will deactivate* I. Setting the hour • The hour LEDs will flash when you are in hour setting mode.
II.Setting the minutes • The minute LEDs will flash when you are in minute setting mode. • Press button A to increase the minutes as required. • Press button B to confirm and move to the animation. III.Setting the animation This watch has a light-up animation feature.
3. How to recharge the battery • To recharge the battery, connect the USB charging cable provided to the watch USB port and then to a power source, e.g. your computer. • To open the watch USB port, use the screw driver included. •...
7. User information I. Battery • This watch uses a PL301517 rechargable watch battery. • The battery should last about 1 month between charges. • The battery lifetime is expected to be 300 charges. • Only use the cable provided with the watch for recharging, as it is designed specifically for this watch.
SPECIFICATIONS Case Materials Acetate Strap Materials Acetate Case Dimensions 32mm x 52mm x 12mm Finish Polished Maximum Fit 210mm (approx.) Wrist Size Weight Display LED Digital Tube Battery PL301517 Water Resistance 3ATM...
Need help?
Do you have a question about the Satellite-X and is the answer not in the manual?
Questions and answers