1. How to read the time • Quasar has 3 display modes [Number], [Pattern] & [Animation] • You may also choose to display the time in [12hr] or [24hr] modes. • See section 5 “How to set the time” to change your preference.
Page 4
2. How to read the date • Press button B to display the date. • The date icon indicates that you are in date mode. • You can illuminate the display for a short time with the EL backlight by pressing button A. •...
Page 5
3. How to check the alarm time • Press button B twice to display the alarm time. • The alarm mode icon indicates that you are in alarm mode. Number mode Alarm indicator Alarm ON indicator PM indicator 10:20 PM (alarm on) Pattern mode 06:30 AM (alarm on)
4. How to use the stopwatch • Press button B three times to display the stop watch. • The stopwatch icon indicates that you are in stopwatch mode. • Press button A to start & stop the timer. • Hold button A for 3 seconds to reset the timer. •...
5. How to set the time • When the time is displayed, press and hold button B for 3 seconds to enter setting mode. *Note after 10 seconds of inactivity setting mode will deactivate I. Setting the hour • The current hour will be flashing. •...
Page 8
III. Setting 12/24 Hour Mode • The display will flash the current hour mode (12 or 24) • Press button A to change the hour mode. • Press button B confirm. 12 hour mode 24 hour mode...
IV. Setting the display mode • The current display mode will be shown. • Press button A to change the display mode. • Press button B to confirm & finish. Number mode Pattern mode Animation mode...
6. How to set the date • When the date is displayed, press and hold button B for 3 seconds to enter date setting mode. *Note after 10 seconds of inactivity setting mode will deactivate I. Setting the year • The year will flash when you are in year setting. •...
Page 11
IV. Setting the date layout • The current date layout mode will flash. • Press button A to change the date layout. • Press button B to confirm & finish. MM.DD DD.MM...
7. How to set the alarm • When the alarm time is displayed, press and hold button B for 3 seconds to enter alarm setting mode. *Note after 10 seconds of inactivity setting mode will deactivate • The alarm mode icon indicates that you are in alarm setting mode.
8. User information I. Battery • This watch uses a CR2025 replaceable watch battery. • Battery lifetime will vary depending on use, but is estimated to last for at least one year. • To maximize battery life you should limit use of the EL backlight.
SPECIFICATIONS Case Material Silicone Strap Material Silicone Case Dimensions 46 mm x 46 mm x 13 mm Finish Matt (silicone parts) Maximum Fit 210mm (approx.) Wrist Size Weight Display LCD with EL backlight Battery CR2025 Water Resistance Limited...